Messages¶
This page is generated by etc/FindMessages.tcl.
Do not edit it by hand; rebuild OpenSTA to regenerate.
| ID | Location | Message |
|---|---|---|
| 0100 | CmdArgs.tcl:116 | unsupported object type $object_type. |
| 0101 | CmdArgs.tcl:173 | object '$obj' not found. |
| 0102 | CmdArgs.tcl:428 | $scene_arg is not the name of a scene. |
| 0103 | CmdArgs.tcl:434 | -scene keyword required with multi-scene analysis. |
| 0104 | CmdArgs.tcl:455 | $scene_name is not the name of a scene. |
| 0105 | CmdArgs.tcl:460 | missing -scene arg. |
| 0106 | CmdArgs.tcl:478 | $scene_name is not the name of a scene. |
| 0107 | CmdArgs.tcl:502 | $scene_name is not the name of a scene. |
| 0108 | CmdArgs.tcl:587 | both -min and -max specified. |
| 0109 | CmdArgs.tcl:601 | both -min and -max specified. |
| 0110 | CmdArgs.tcl:628 | only one of -early and -late can be specified. |
| 0111 | CmdArgs.tcl:634 | -early or -late must be specified. |
| 0112 | CmdArgs.tcl:641 | both -early and -late specified. |
| 0113 | CmdArgs.tcl:656 | $arg_name must be a single library. |
| 0114 | CmdArgs.tcl:662 | $arg_name type '$object_type' is not a library. |
| 0115 | CmdArgs.tcl:667 | library '$arg' not found. |
| 0116 | CmdArgs.tcl:684 | $arg_name must be a single lib cell. |
| 0123 | CmdArgs.tcl:771 | $arg_name must be a single instance. |
| 0124 | CmdArgs.tcl:777 | $arg_name type '$object_type' is not an instance. |
| 0125 | CmdArgs.tcl:782 | instance '$arg' not found. |
| 0126 | CmdArgs.tcl:801 | $arg_name type '$object_type' is not an instance. |
| 0127 | CmdArgs.tcl:808 | instance '$arg' not found. |
| 0128 | CmdArgs.tcl:828 | $arg_name type '$object_type' is not a liberty cell. |
| 0129 | CmdArgs.tcl:835 | liberty cell '$arg' not found. |
| 0131 | CmdArgs.tcl:896 | $arg_name type '$object_type' is not a pin or port. |
| 0132 | CmdArgs.tcl:903 | pin '$arg' not found. |
| 0133 | CmdArgs.tcl:923 | $arg_name type '$object_type' is not a port. |
| 0134 | CmdArgs.tcl:552 | $scene_arg is not the name of a scene. |
| 0135 | CmdArgs.tcl:547 | scene object type '$object_type' is not a scene. |
| 0139 | CmdArgs.tcl:1004 | unsupported object type $object_type. |
| 0141 | CmdArgs.tcl:1025 | $arg_name '$object_type' is not a net. |
| 0142 | CmdArgs.tcl:1049 | unsupported object type $object_type. |
| 0143 | CmdArgs.tcl:1030 | $arg_name '$arg' not found. |
| 0144 | CmdArgs.tcl:423 | scene object type '$object_type' is not a scene. |
| 0160 | CmdUtil.tcl:61 | no commands match '$pattern'. |
| 0161 | CmdUtil.tcl:217 | Usage: $cmd $cmd_args($cmd) |
| 0162 | CmdUtil.tcl:219 | Usage: $cmd argument error |
| 0164 | CmdUtil.tcl:400 | unsupported object type $list_type. |
| 0165 | CmdUtil.tcl:418 | unknown namespace $namespc. |
| 0166 | CmdUtil.tcl:344 | unknown unit $unit prefix '${arg_prefix}'. |
| 0167 | CmdUtil.tcl:347 | incorrect unit suffix '$arg_suffix'. |
| 0168 | Search.tcl:841 | unknown field $field. |
| 0170 | SdfParse.yy:43 | {} |
| 0171 | VerilogParse.yy:47 | {} |
| 0172 | SdfReader.cc:310 | INSTANCE wildcards not supported. |
| 0173 | SdfReader.cc:627 | NOCHANGE not supported. |
| 0180 | SdfReader.cc:162 | TIMESCALE units not us, ns, or ps. |
| 0181 | SdfReader.cc:165 | TIMESCALE multiplier not 1, 10, or 100. |
| 0182 | SdfReader.cc:187 | pin {} is a hierarchical pin. |
| 0183 | SdfReader.cc:189 | pin {} is a hierarchical pin. |
| 0184 | SdfReader.cc:192 | INTERCONNECT from {} to {} not found. |
| 0185 | SdfReader.cc:198 | pin {} not found. |
| 0186 | SdfReader.cc:200 | pin {} not found. |
| 0187 | SdfReader.cc:216 | pin {} not found. |
| 0188 | SdfReader.cc:269 | {} with no triples. |
| 0189 | SdfReader.cc:271 | {} with more than 2 triples. |
| 0190 | SdfReader.cc:299 | instance {} cell {} does not match enclosing cell {}. |
| 0191 | SdfReader.cc:383 | cell {} IOPATH {} -> {} not found. |
| 0192 | SdfReader.cc:468 | cell {} {} -> {} {} check not found. |
| 0193 | SdfReader.cc:290 | INSTANCE wildcards not supported. |
| 0194 | SdfReader.cc:401 | instance {} port {} not found. |
| 0195 | SdfReader.cc:977 | instance {} not found. |
| 0196 | SdfReader.cc:1039 | {} |
| 0204 | ArnoldiDelayCalc.cc:644 | arnoldi delay calc failed. |
| 0220 | Link.tcl:53 | missing top_cell_name argument and no current_design. |
| 0225 | InternalPower.cc:156 | unsupported table order |
| 0226 | InternalPower.cc:171 | unsupported table axes |
| 0230 | Network.tcl:59 | instance $instance_path not found. |
| 0231 | Network.tcl:180 | net $net_path not found. |
| 0232 | Network.tcl:183 | net $net_path not found. |
| 0233 | Network.tcl:44 | report_instance -connections is deprecated. |
| 0234 | Network.tcl:48 | report_instance -verbose is deprecated. |
| 0239 | TableModel.cc:324 | unsupported table order |
| 0240 | TableModel.cc:387 | unsupported table axes |
| 0241 | TableModel.cc:634 | unsupported table order |
| 0242 | TableModel.cc:652 | unsupported table axes |
| 0243 | TimingArc.cc:252 | timing arc max index exceeded |
| 0244 | Clock.cc:421 | generated clock edges size is not three. |
| 0249 | GatedClk.cc:251 | illegal gated clock active value |
| 0250 | NetworkEdit.tcl:135 | unsupported object type $object_type. |
| 0252 | NetworkEdit.tcl:213 | unsupported object type $object_type. |
| 0253 | NetworkEdit.tcl:235 | unsupported object type $object_type. |
| 0266 | VertexVisitor.cc:40 | VertexPinCollector::copy not supported. |
| 0268 | VerilogWriter.cc:263 | unknown port direction |
| 0276 | Parasitics.tcl:93 | path instance '$path' not found. |
| 0280 | PathEnum.cc:717 | diversion path not found |
| 0303 | Power.tcl:256 | activity cannot be set on clock ports. |
| 0304 | Power.tcl:72 | No liberty libraries have been read. |
| 0305 | Power.tcl:292 | read_power_activities is deprecated. Use read_vcd. |
| 0306 | Power.tcl:161 | Specify -activity or -density. |
| 0307 | Power.tcl:173 | -activity requires a clock to be defined |
| 0308 | Power.tcl:184 | -clock ignored for -density |
| 0309 | Power.tcl:192 | duty should be 0.0 to 1.0 |
| 0310 | Power.tcl:207 | activity cannot be set on clock ports. |
| 0311 | Power.tcl:85 | unknown power report -format $format |
| 0326 | Sdc.tcl:465 | object '$pattern' is not an instance. |
| 0327 | Sdc.tcl:520 | object '$pattern' is not an clock. |
| 0328 | Sdc.tcl:593 | object '$pattern' is not a liberty cell. |
| 0329 | Sdc.tcl:690 | object '$pattern' is not a liberty pin. |
| 0330 | Sdc.tcl:780 | object '$pattern' is not a liberty library. |
| 0331 | Sdc.tcl:889 | object '$pattern' is not a net. |
| 0332 | Sdc.tcl:991 | object '$pattern' is not a pin. |
| 0333 | Sdc.tcl:1061 | object '$pattern' is not a port. |
| 0334 | Sdc.tcl:3412 | object '$cell_name' is not a liberty cell. |
| 0335 | Sdc.tcl:675 | positional arguments not supported with -of_objects. |
| 0339 | Util.tcl:607 | tcl version > 8.6 required for zlib support. |
| 0340 | Util.tcl:603 | cannot open '$filename'. |
| 0341 | Util.tcl:654 | incomplete command at end of file. |
| 0342 | Sdc.tcl:157 | hierarchy separator must be one of '$sdc_dividers'. |
| 0343 | Sdc.tcl:224 | unknown unit $unit prefix '${arg_prefix}'. |
| 0344 | Sdc.tcl:243 | unknown $unit prefix '$prefix'. |
| 0345 | Sdc.tcl:249 | $unit scale [format %.0e $scale] does not match library scale [format %.0e $unit_scale]. |
| 0346 | Sdc.tcl:345 | only one of -cells, -data_pins, -clock_pins, -async_pins, -output_pins are suppported. |
| 0347 | Sdc.tcl:389 | current_design for other than top cell not supported. |
| 0348 | Sdc.tcl:439 | patterns argument not supported with -of_objects. |
| 0349 | Sdc.tcl:478 | instance '$pattern' not found. |
| 0351 | Sdc.tcl:529 | clock '$pattern' not found. |
| 0352 | Sdc.tcl:568 | positional arguments not supported with -of_objects. |
| 0353 | Sdc.tcl:605 | library '$lib_name' not found. |
| 0354 | Sdc.tcl:617 | cell '$cell_pattern' not found. |
| 0355 | Sdc.tcl:703 | library/cell/port '$pattern' not found. |
| 0356 | Sdc.tcl:726 | port '$port_pattern' not found. |
| 0357 | Sdc.tcl:731 | library '$lib_name' not found. |
| 0358 | Sdc.tcl:746 | -nocase ignored without -regexp. |
| 0359 | Sdc.tcl:789 | library '$pattern' not found. |
| 0360 | Sdc.tcl:870 | patterns argument not supported with -of_objects. |
| 0361 | Sdc.tcl:900 | net '$pattern' not found. |
| 0362 | Sdc.tcl:949 | patterns argument not supported with -of_objects. |
| 0363 | Sdc.tcl:1007 | pin '$pattern' not found. |
| 0365 | Sdc.tcl:1050 | patterns argument not supported with -of_objects. |
| 0366 | Sdc.tcl:1070 | port '$pattern' not found. |
| 0368 | Sdc.tcl:1138 | -add requires -name. |
| 0369 | Sdc.tcl:1143 | -name or port_pin_list must be specified. |
| 0370 | Sdc.tcl:1151 | missing -period argument. |
| 0371 | Sdc.tcl:1157 | -waveform edge_list must have an even number of edge times. |
| 0372 | Sdc.tcl:1166 | non-increasing clock -waveform edge times. |
| 0373 | Sdc.tcl:1169 | -waveform time greater than two periods. |
| 0374 | Sdc.tcl:1285 | empty ports/pins/nets argument. |
| 0375 | Sdc.tcl:1293 | -add requires -name. |
| 0376 | Sdc.tcl:1298 | name or port_pin_list must be specified. |
| 0377 | Sdc.tcl:1305 | missing -source argument. |
| 0378 | Sdc.tcl:1320 | -master_clock argument empty. |
| 0379 | Sdc.tcl:1323 | -add requireds -master_clock. |
| 0380 | Sdc.tcl:1327 | -multiply_by and -divide_by options are exclusive. |
| 0381 | Sdc.tcl:1331 | -divide_by is not an integer greater than one. |
| 0382 | Sdc.tcl:1334 | -combinational implies -divide_by 1. |
| 0383 | Sdc.tcl:1339 | -multiply_by is not an integer greater than one. |
| 0384 | Sdc.tcl:1345 | -duty_cycle is not a float between 0 and 100. |
| 0385 | Sdc.tcl:1351 | -edges only supported for three edges. |
| 0386 | Sdc.tcl:1357 | edges times are not monotonically increasing. |
| 0387 | Sdc.tcl:1366 | -edge_shift length does not match -edges length. |
| 0388 | Sdc.tcl:1372 | missing -multiply_by, -divide_by, -combinational or -edges argument. |
| 0389 | Sdc.tcl:1380 | cannot specify -invert without -multiply_by, -divide_by or -combinational. |
| 0390 | Sdc.tcl:1386 | -duty_cycle requires -multiply_by value. |
| 0391 | Sdc.tcl:1467 | group_path command failed. |
| 0392 | Sdc.tcl:1474 | positional arguments not supported. |
| 0393 | Sdc.tcl:1478 | -from, -through or -to required. |
| 0394 | Sdc.tcl:1484 | -name and -default are mutually exclusive. |
| 0395 | Sdc.tcl:1486 | -name or -default option is required. |
| 0396 | Sdc.tcl:1540 | cannot specify both -high and -low. |
| 0397 | Sdc.tcl:1548 | missing -setup or -hold argument. |
| 0398 | Sdc.tcl:1562 | -high and -low only permitted for pins and instances. |
| 0399 | Sdc.tcl:1569 | -high and -low only permitted for pins and instances. |
| 0400 | Sdc.tcl:1621 | one of -logically_exclusive, -physically_exclusive or -asynchronous is required. |
| 0401 | Sdc.tcl:1624 | the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. |
| 0402 | Sdc.tcl:1643 | unknown keyword argument $arg. |
| 0403 | Sdc.tcl:1645 | extra positional argument $arg. |
| 0404 | Sdc.tcl:1682 | the -all and -name options are mutually exclusive. |
| 0405 | Sdc.tcl:1685 | either -all or -name options must be specified. |
| 0406 | Sdc.tcl:1693 | one of -logically_exclusive, -physically_exclusive or -asynchronous is required. |
| 0407 | Sdc.tcl:1696 | the keywords -logically_exclusive, -physically_exclusive and -asynchronous are mutually exclusive. |
| 0408 | Sdc.tcl:1755 | -clock ignored for clock objects. |
| 0409 | Sdc.tcl:1769 | -source '[get_full_name $pin]' is not a clock pin. |
| 0410 | Sdc.tcl:1776 | -early/-late is only allowed with -source. |
| 0411 | Sdc.tcl:1811 | -clock ignored for clock objects. |
| 0412 | Sdc.tcl:1823 | -source '[$pin path_name]' is not a clock pin. |
| 0413 | Sdc.tcl:1866 | set_sense -type data not supported. |
| 0414 | Sdc.tcl:1870 | set_sense -type clock|data |
| 0415 | Sdc.tcl:1890 | set_clock_sense is deprecated as of SDC 2.1. Use set_sense -type clock. |
| 0416 | Sdc.tcl:1902 | -pulse argument not supported. |
| 0417 | Sdc.tcl:1911 | -positive, -negative, -stop_propagation and -pulse are mutually exclusive. |
| 0418 | Sdc.tcl:1924 | hierarchical pin '[get_full_name $pin]' not supported. |
| 0419 | Sdc.tcl:1953 | transition time can not be specified for virtual clocks. |
| 0420 | Sdc.tcl:2014 | missing uncertainty value. |
| 0421 | Sdc.tcl:2062 | -from/-to must be used together. |
| 0422 | Sdc.tcl:2082 | -rise, -fall options not allowed for single clock uncertainty. |
| 0423 | Sdc.tcl:2155 | -from/-to must be used together. |
| 0424 | Sdc.tcl:2175 | -rise, -fall options not allowed for single clock uncertainty. |
| 0425 | Sdc.tcl:2223 | missing -from, -rise_from or -fall_from argument. |
| 0426 | Sdc.tcl:2235 | missing -to, -rise_to or -fall_to argument. |
| 0427 | Sdc.tcl:2289 | missing -from, -rise_from or -fall_from argument. |
| 0428 | Sdc.tcl:2301 | missing -to, -rise_to or -fall_to argument. |
| 0429 | Sdc.tcl:2379 | -from/-to keywords ignored for lib_pin, port and pin arguments. |
| 0430 | Sdc.tcl:2409 | -from/-to hierarchical instance not supported. |
| 0431 | Sdc.tcl:2441 | pin '[get_full_name $inst]${hierarchy_separator}${port_name}' not found. |
| 0432 | Sdc.tcl:2498 | pin '[get_name $cell]${hierarchy_separator}${port_name}' not found. |
| 0434 | Sdc.tcl:2538 | -from/-to keywords ignored for lib_pin, port and pin arguments. |
| 0435 | Sdc.tcl:2590 | -from/-to hierarchical instance not supported. |
| 0436 | Sdc.tcl:2657 | '$args' ignored. |
| 0437 | Sdc.tcl:2661 | -from, -through or -to required. |
| 0438 | Sdc.tcl:2774 | -source_latency_included ignored with -reference_pin. |
| 0439 | Sdc.tcl:2777 | -network_latency_included ignored with -reference_pin. |
| 0440 | Sdc.tcl:2796 | $cmd not allowed on [pin_direction $pin] port '[get_full_name $pin]'. |
| 0441 | Sdc.tcl:2798 | $cmd relative to a clock defined on the same port/pin not allowed. |
| 0442 | Sdc.tcl:2866 | missing delay argument. |
| 0443 | Sdc.tcl:2872 | '$args' ignored. |
| 0444 | Sdc.tcl:3094 | missing path multiplier argument. |
| 0445 | Sdc.tcl:3099 | '$args' ignored. |
| 0446 | Sdc.tcl:3106 | cannot use -start with -end. |
| 0447 | Sdc.tcl:3162 | $cmd command failed. |
| 0448 | Sdc.tcl:3169 | positional arguments not supported. |
| 0449 | Sdc.tcl:3173 | -from, -through or -to required. |
| 0450 | Sdc.tcl:3263 | virtual clock [get_name $clk] can not be propagated. |
| 0451 | Sdc.tcl:3315 | value must be 0, zero, 1, one, rise, rising, fall, or falling. |
| 0452 | Sdc.tcl:3406 | cell '$lib_name:$cell_name' not found. |
| 0453 | Sdc.tcl:3419 | '$cell_name' not found. |
| 0454 | Sdc.tcl:3423 | missing -lib_cell argument. |
| 0455 | Sdc.tcl:3431 | port '$to_port_name' not found. |
| 0456 | Sdc.tcl:3443 | -pin argument required for cells with multiple outputs. |
| 0457 | Sdc.tcl:3458 | port '$from_port_name' not found. |
| 0458 | Sdc.tcl:3476 | -multiply_by ignored. |
| 0459 | Sdc.tcl:3479 | -dont_scale ignored. |
| 0460 | Sdc.tcl:3482 | -no_design_rule ignored. |
| 0461 | Sdc.tcl:3506 | set_fanout_load not supported. |
| 0462 | Sdc.tcl:3535 | -clock not supported. |
| 0463 | Sdc.tcl:3538 | -clock_fall not supported. |
| 0464 | Sdc.tcl:3608 | -pin_load not allowed for net objects. |
| 0465 | Sdc.tcl:3611 | -wire_load not allowed for net objects. |
| 0466 | Sdc.tcl:3614 | -rise/-fall not allowed for net objects. |
| 0467 | Sdc.tcl:3722 | port '[get_name $port]' is not an input. |
| 0468 | Sdc.tcl:3779 | -data_path, -clock_path, -rise, -fall ignored for ports and designs. |
| 0469 | Sdc.tcl:3873 | derating factor greater than 2.0. |
| 0470 | Sdc.tcl:3910 | -cell_delay and -cell_check flags ignored for net objects. |
| 0471 | Sdc.tcl:3981 | no valid objects specified for $key. |
| 0472 | Sdc.tcl:4014 | no valid objects specified for $key |
| 0473 | Sdc.tcl:4063 | no valid objects specified for $key. |
| 0474 | Sdc.tcl:4144 | operating condition '$op_cond_name' not found. |
| 0475 | Sdc.tcl:4162 | operating condition '$op_cond_name' not found. |
| 0476 | Sdc.tcl:4176 | -analysis_type must be single, bc_wc or on_chip_variation. |
| 0477 | Sdc.tcl:4189 | set_wire_load_min_block_size not supported. |
| 0478 | Sdc.tcl:4203 | mode must be top, enclosed or segmented. |
| 0479 | Sdc.tcl:4224 | no wire load model specified. |
| 0480 | Sdc.tcl:4246 | wire load model '$model_name' not found. |
| 0481 | Sdc.tcl:4291 | wire load selection group '$selection_name' not found. |
| 0482 | Sta.tcl:109 | define_corners must be called before read_liberty. |
| 0483 | Sta.tcl:78 | -liberty or -liberty_min and -liberty_max are required arguments. |
| 0484 | Sta.tcl:92 | -spef_min and -spef_max are required arguments. |
| 0486 | Sdc.tcl:3593 | -subtract_pin_load not allowed for port objects. |
| 0500 | Sdc.tcl:4472 | no default operating conditions found. |
| 0501 | Sdc.tcl:227 | incorrect unit suffix '$arg_suffix'. |
| 0502 | Search.tcl:209 | $cmd -endpoint_count is deprecated. Use -endpoint_path_count instead. |
| 0503 | Search.tcl:222 | $cmd -group_count is deprecated. Use -group_path_count instead. |
| 0510 | Search.tcl:183 | $cmd -path_delay must be min, min_rise, min_fall, max, max_rise, max_fall or min_max. |
| 0511 | Search.tcl:193 | $cmd command failed. |
| 0512 | Search.tcl:216 | -endpoint_path_count must be a positive integer. |
| 0513 | Search.tcl:230 | -group_path_count must be >= 1. |
| 0514 | Search.tcl:261 | '$arg' is not a known keyword or flag. |
| 0515 | Search.tcl:263 | positional arguments not supported. |
| 0516 | Search.tcl:299 | report_clock_skew -setup and -hold are mutually exclusive options. |
| 0520 | Search.tcl:567 | analysis type single is not consistent with doing both setup/max and hold/min checks. |
| 0521 | Search.tcl:573 | positional arguments not supported. |
| 0522 | Search.tcl:738 | -min and -max cannot both be specified. |
| 0523 | Search.tcl:758 | pin '$pin_arg' is hierarchical. |
| 0524 | Search.tcl:811 | -format $format not recognized. |
| 0526 | Search.tcl:1017 | specify one of -setup and -hold. |
| 0527 | Search.tcl:1097 | unknown path group '$name'. |
| 0540 | Sta.tcl:377 | -from/-to arguments not supported with -of_objects. |
| 0541 | Sta.tcl:241 | No load pins connected to net [get_full_name $net]. |
| 0560 | Util.tcl:52 | $cmd $key missing value. |
| 0561 | Util.tcl:69 | $cmd $key missing value. |
| 0562 | Util.tcl:79 | $cmd $arg is not a known keyword or flag. |
| 0563 | Util.tcl:101 | $cmd $arg is not a known keyword or flag. |
| 0564 | Util.tcl:481 | $cmd positional arguments not supported. |
| 0565 | Util.tcl:487 | $cmd requires one positional argument. |
| 0566 | Util.tcl:494 | $cmd requires zero or one positional arguments. |
| 0567 | Util.tcl:500 | $cmd requires two positional arguments. |
| 0568 | Util.tcl:507 | $cmd requires one or two positional arguments. |
| 0569 | Util.tcl:513 | $cmd requires three positional arguments. |
| 0570 | Util.tcl:519 | $cmd requires four positional arguments. |
| 0571 | Util.tcl:527 | $cmd_arg '$arg' is not a float. |
| 0572 | Util.tcl:533 | $cmd_arg '$arg' is not a positive float. |
| 0573 | Util.tcl:539 | $cmd_arg '$arg' is not an integer. |
| 0574 | Util.tcl:545 | $cmd_arg '$arg' is not a positive integer. |
| 0575 | Util.tcl:551 | $cmd_arg '$arg' is not an integer greater than or equal to one. |
| 0576 | Util.tcl:557 | $cmd_arg '$arg' is not between 0 and 100. |
| 0577 | Sta.tcl:112 | define_corners must define at least one corner. |
| 0578 | Sta.tcl:130 | $scene_name is not the name of a scene. |
| 0579 | Sta.tcl:159 | $mode_name is not the name of a mode. |
| 0590 | Variables.tcl:45 | sta_report_default_digits must be a positive integer. |
| 0591 | Variables.tcl:70 | sta_crpr_mode must be pin or transition. |
| 0592 | Variables.tcl:261 | $var_name value must be 0 or 1. |
| 0593 | Variables.tcl:169 | sta_pocv_mode must be scalar, normal, or skew_normal. |
| 0594 | Variables.tcl:187 | sta_pocv_quantile must be a positive floating point number. |
| 0616 | Levelize.cc:516 | maximum logic level exceeded |
| 0617 | Levelize.cc:666 | level check failed {} {} -> {} {} |
| 0618 | Levelize.cc:647 | maximum logic level exceeded |
| 0620 | Sdf.tcl:68 | -cond_use must be min, max or min_max. |
| 0621 | Sdf.tcl:73 | -cond_use min_max cannot be used with analysis type single. |
| 0623 | Sdf.tcl:245 | SDF -divider must be / or . |
| 0624 | Sdf.tcl:130 | -list_annotated is deprecated. Use -report_annotated. |
| 0626 | Sdf.tcl:203 | -list_annotated is deprecated. Use -report_annotated. |
| 0627 | Sdf.tcl:209 | -list_not_annotated is deprecated. Use -report_unannotated. |
| 0800 | VcdParse.cc:107 | unknown vcd command. |
| 0801 | VcdParse.cc:141 | timescale syntax error. |
| 0802 | VcdParse.cc:156 | Unknown timescale unit. |
| 0804 | VcdParse.cc:203 | Variable syntax error. |
| 0805 | VcdParse.cc:94 | invalid time {} |
| 0806 | VcdParse.cc:97 | time out of range {} |
| 0807 | VcdParse.cc:245 | unknown variable {} |
| 0808 | VcdParse.cc:238 | unknown variable {} |
| 0809 | VcdParse.cc:186 | Unknown variable type {}. |
| 0820 | VcdReader.cc:445 | No clocks have been defined. |
| 1000 | ConcreteNetwork.cc:2002 | cell type {} can not be linked. |
| 1010 | CycleAccting.cc:96 | No common period was found between clocks {} and {}. |
| 1040 | DmpCeff.cc:1020 | parasitic Pi model has NaNs. |
| 1060 | Genclks.cc:242 | no master clock found for generated clock {}. |
| 1100 | GraphDelayCalc.cc:591 | port not found in cell. |
| 1101 | GraphDelayCalc.cc:913 | mult_drvr missing load. |
| 1110 | Liberty.cc:749 | cell {}/{} port {} not found in cell {}/{}. |
| 1111 | Liberty.cc:777 | cell {}/{} {} -> {} timing group {} not found in cell {}/{}. |
| 1112 | Liberty.cc:796 | Liberty cell {}/{} for corner {}/{} not found. |
| 1113 | Liberty.cc:1722 | cell {}/{} {} -> {} latch enable {}edge is inconsistent with {} -> {} setup{} check. |
| 1114 | Liberty.cc:1658 | cell {}/{} {} -> {} latch enable {}_edge is inconsistent with latch group enable function positive sense. |
| 1115 | Liberty.cc:1666 | cell {}/{} {} -> {} latch enable {}_edge is inconsistent with latch group enable function negative sense. |
| 1116 | Liberty.cc:348 | unsupported slew degradation table axes |
| 1117 | Liberty.cc:364 | unsupported slew degradation table axes |
| 1118 | Liberty.cc:369 | unsupported slew degradation table order |
| 1119 | Liberty.cc:399 | unsupported slew degradation table axes |
| 1120 | Liberty.cc:1871 | library missing vdd |
| 1121 | Liberty.cc:1676 | cell {}/{} no latch enable found for {} -> {}. |
| 1128 | LibertyParser.cc:355 | LibertyAttrValue::floatValue() called on string |
| 1130 | LibExprReader.cc:83 | {} references unknown port {}. |
| 1131 | LibExprReader.cc:135 | {} {}. |
| 1140 | LibertyReader.cc:280 | library {} already exists. |
| 1141 | LibertyReader.cc:309 | library missing name. |
| 1142 | LibertyReader.cc:832 | default_wire_load {} not found. |
| 1143 | LibertyReader.cc:863 | default_wire_selection {} not found. |
| 1144 | LibertyReader.cc:680 | default_operating_condition {} not found. |
| 1145 | LibertyReader.cc:536 | input_threshold_pct_{} not found. |
| 1146 | LibertyReader.cc:538 | output_threshold_pct_{} not found. |
| 1147 | LibertyReader.cc:540 | slew_lower_threshold_pct_{} not found. |
| 1148 | LibertyReader.cc:542 | slew_upper_threshold_pct_{} not found. |
| 1150 | LibertyReader.cc:406 | unknown unit multiplier {}. |
| 1151 | LibertyReader.cc:429 | unknown unit scale {}. |
| 1152 | LibertyReader.cc:432 | unknown unit suffix {}. |
| 1153 | LibertyReader.cc:435 | unknown unit suffix {}. |
| 1154 | LibertyReader.cc:364 | capacitive_load_units are not ff or pf. |
| 1155 | LibertyReader.cc:367 | capacitive_load_units are not a string. |
| 1156 | LibertyReader.cc:373 | capacitive_load_units missing suffix. |
| 1157 | LibertyReader.cc:370 | capacitive_load_units scale is not a float. |
| 1158 | LibertyReader.cc:375 | capacitive_load_units missing scale and suffix. |
| 1160 | LibertyReader.cc:453 | delay_model {} not supported. |
| 1161 | LibertyReader.cc:457 | delay_model {} not supported. |
| 1162 | LibertyReader.cc:461 | delay_model {} not supported. |
| 1163 | LibertyReader.cc:466 | delay_model {} not supported.. |
| 1164 | LibertyReader.cc:469 | unknown delay_model {}. |
| 1165 | LibertyReader.cc:486 | unknown bus_naming_style format. |
| 1166 | LibertyReader.cc:640 | voltage_map voltage is not a float. |
| 1171 | LibertyReader.cc:962 | {} is 0.0. |
| 1172 | LibertyReader.cc:964 | {} is 0.0. |
| 1173 | LibertyReader.cc:2561 | non-increasing table index values. |
| 1174 | LibertyReader.cc:847 | default_wire_load_mode {} not found. |
| 1175 | LibertyReader.cc:577 | table template missing name. |
| 1177 | LibertyReader.cc:2554 | missing table index values. |
| 1178 | LibertyReader.cc:603 | non-increasing table index values. |
| 1179 | LibertyReader.cc:508 | bus type missing bit_from. |
| 1180 | LibertyReader.cc:510 | bus type missing bit_to. |
| 1183 | LibertyReader.cc:3271 | {} value {} is not a float. |
| 1184 | LibertyReader.cc:774 | wire_load missing name. |
| 1185 | LibertyReader.cc:770 | fanout_length is missing length and fanout. |
| 1187 | LibertyReader.cc:804 | wireload {} not found. |
| 1189 | LibertyReader.cc:811 | wire_load_from_area min not a float. |
| 1190 | LibertyReader.cc:814 | wire_load_from_area max not a float. |
| 1191 | LibertyReader.cc:817 | wire_load_from_area missing parameters. |
| 1193 | LibertyReader.cc:190 | cell missing name. |
| 1196 | LibertyReader.cc:1723 | {} {} bus width mismatch. |
| 1200 | LibertyReader.cc:2847 | latch enable function is non-unate for port {}. |
| 1201 | LibertyReader.cc:2852 | latch enable function is unknown for port {}. |
| 1202 | LibertyReader.cc:1021 | operating conditions {} not found. |
| 1203 | LibertyReader.cc:1025 | scaled_cell missing operating condition. |
| 1204 | LibertyReader.cc:1028 | scaled_cell cell {} has not been defined. |
| 1205 | LibertyReader.cc:1031 | scaled_cell missing name. |
| 1206 | LibertyReader.cc:1043 | scaled_cell {}, {} ports do not match cell ports |
| 1207 | LibertyReader.cc:1053 | scaled_cell ports do not match cell ports. |
| 1209 | LibertyReader.cc:1936 | combinational timing to an input port. |
| 1210 | LibertyReader.cc:2184 | missing {}_transition. |
| 1211 | LibertyReader.cc:2186 | missing cell_{}. |
| 1212 | LibertyReader.cc:2592 | timing group from output port. |
| 1213 | LibertyReader.cc:2602 | timing group from output port. |
| 1214 | LibertyReader.cc:2612 | timing group from output port. |
| 1215 | LibertyReader.cc:2647 | timing group from output port. |
| 1219 | LibertyReader.cc:2362 | unsupported model axis. |
| 1221 | LibertyReader.cc:2467 | output current waveform {:.2e} {:.2e} not found. |
| 1224 | LibertyReader.cc:2415 | vector reference_time not found. |
| 1227 | LibertyReader.cc:2895 | normalized_driver_waveform missing template. |
| 1228 | LibertyReader.cc:2915 | level_shifter_type must be HL, LH, or HL_LH |
| 1229 | LibertyReader.cc:2931 | switch_cell_type must be coarse_grain or fine_grain |
| 1230 | LibertyReader.cc:1863 | scaling_factors {} not found. |
| 1232 | LibertyReader.cc:1143 | pin {} not found. |
| 1233 | LibertyReader.cc:1147 | pin name is not a string. |
| 1234 | LibertyReader.cc:1197 | pin name is not a string. |
| 1235 | LibertyReader.cc:1117 | bus_type {} not found. |
| 1236 | LibertyReader.cc:1121 | bus_type not found. |
| 1237 | LibertyReader.cc:2947 | OCV derate group named {} not found. |
| 1238 | LibertyReader.cc:1376 | {} attribute is not boolean. |
| 1239 | LibertyReader.cc:1379 | {} attribute is not boolean. |
| 1240 | LibertyReader.cc:1491 | unknown port direction. |
| 1241 | LibertyReader.cc:1551 | max_transition is 0.0. |
| 1242 | LibertyReader.cc:1426 | pulse_latch unknown pulse type. |
| 1243 | LibertyReader.cc:1956 | timing group missing related_pin/related_bus_pin. |
| 1244 | LibertyReader.cc:2017 | unknown timing_type {}. |
| 1245 | LibertyReader.cc:2003 | unknown timing_sense {}. |
| 1246 | LibertyReader.cc:2074 | mode value is not a string. |
| 1248 | LibertyReader.cc:2068 | mode name is not a string. |
| 1249 | LibertyReader.cc:2077 | mode requirees 2 values. |
| 1251 | LibertyReader.cc:2496 | unsupported model axis. |
| 1253 | LibertyReader.cc:2502 | table template {} not found. |
| 1254 | LibertyReader.cc:916 | unsupported model axis. |
| 1256 | LibertyReader.cc:2871 | table template {} not found. |
| 1257 | LibertyReader.cc:2541 | {} is missing values. |
| 1258 | LibertyReader.cc:3194 | {} is not a list of floats. |
| 1259 | LibertyReader.cc:3197 | {} row has {} columns but axis has {}. |
| 1260 | LibertyReader.cc:3208 | {} missing axis values. |
| 1261 | LibertyReader.cc:3211 | {} has {} rows but axis has {}. |
| 1262 | LibertyReader.cc:3039 | cell {} test_cell redefinition. |
| 1263 | LibertyReader.cc:896 | mode definition missing name. |
| 1264 | LibertyReader.cc:892 | mode value missing name. |
| 1272 | LibertyReader.cc:3240 | {} is not a float. |
| 1273 | LibertyReader.cc:3245 | {} is not a float. |
| 1274 | LibertyReader.cc:3248 | {} requires 2 valules. |
| 1277 | LibertyReader.cc:3327 | {} has no values. |
| 1279 | LibertyReader.cc:1908 | {} attribute is not boolean. |
| 1280 | LibertyReader.cc:1911 | {} attribute is not boolean. |
| 1282 | LibertyReader.cc:3370 | attribute {} value {} not recognized. |
| 1283 | LibertyReader.cc:3386 | unknown early/late value. |
| 1284 | LibertyReader.cc:3438 | OCV derate group named {} not found. |
| 1285 | LibertyReader.cc:3524 | ocv_derate missing name. |
| 1286 | LibertyReader.cc:3466 | unknown rise/fall. |
| 1287 | LibertyReader.cc:3494 | unknown derate type. |
| 1288 | LibertyReader.cc:3352 | {} attribute is not boolean. |
| 1289 | LibertyReader.cc:3355 | {} attribute is not boolean. |
| 1290 | LibertyReader.cc:2782 | port {} not found. |
| 1291 | LibertyReader.cc:1232 | unknown pg_type. |
| 1292 | LibertyReader.cc:3573 | port {} subscript out of range. |
| 1293 | LibertyReader.cc:3576 | port range {} of non-bus port {}. |
| 1294 | LibertyReader.cc:3590 | port {} not found. |
| 1295 | LibertyReader.cc:3656 | port {} not found. |
| 1297 | LibertyReader.cc:590 | axis type {} not supported. |
| 1298 | LibertyReader.cc:3017 | statetable input port {} not found. |
| 1299 | LibertyReader.cc:1464 | unknown signal_type {}. |
| 1300 | LibertyReader.cc:2979 | table row must have 3 groups separated by ':'. |
| 1301 | LibertyReader.cc:2984 | table row has {} input values but {} are required. |
| 1303 | LibertyReader.cc:2997 | table row has {} next values but {} are required. |
| 1304 | LibertyReader.cc:3147 | table input value '{}' not recognized. |
| 1305 | LibertyReader.cc:3165 | table internal value '{}' not recognized. |
| 1306 | LibertyReader.cc:2811 | port {} not found. |
| 1307 | LibertyReader.cc:2702 | leakage_power missing value. |
| 1308 | LibertyReader.cc:3517 | table template {} not found. |
| 1309 | LibertyReader.cc:3480 | unknown early/late value. |
| 1310 | LibertyReader.cc:3290 | {} is not a float. |
| 1311 | LibertyReader.cc:2212 | no table models found in timing group. |
| 1312 | LibertyReader.cc:3520 | ocv_derate_factors missing template. |
| 1313 | LibertyReader.cc:1178 | bundle missing name. |
| 1314 | LibertyReader.cc:1246 | pg_pin missing name. |
| 1338 | Verilog.tcl:62 | The -sort flag is ignored. |
| 1340 | LibertyWriter.cc:322 | {}/{} bundled ports not supported. |
| 1341 | LibertyWriter.cc:482 | {}/{}/{} timing model not supported. |
| 1342 | LibertyWriter.cc:500 | 3 axis table models not supported. |
| 1343 | LibertyWriter.cc:647 | {}/{}/{} timing arc type {} not supported. |
| 1350 | LumpedCapDelayCalc.cc:146 | gate delay load cap is NaN |
| 1351 | LumpedCapDelayCalc.cc:148 | gate delay input slew is NaN |
| 1360 | TagGroup.cc:314 | tag group missing tag |
| 1370 | PathEnum.cc:634 | path diversion missing edge. |
| 1380 | MakeTimingModel.cc:234 | clock {} pin {} is inside model block. |
| 1390 | VerilogReader.cc:1492 | {} is not a verilog module. |
| 1391 | VerilogReader.cc:1497 | {} is not a verilog module. |
| 1440 | Bdd.cc:100 | unknown function operator |
| 1450 | VcdReader.cc:454 | VCD max time is zero. |
| 1451 | VcdReader.cc:299 | problem parsing bus {}. |
| 1453 | VcdReader.cc:501 | clock {} pin {} has no vcd transitions. |
| 1490 | Sdc.cc:4141 | group path name and is_default are mutually exclusive. |
| 1510 | Search.cc:2686 | max tag group index exceeded |
| 1511 | Search.cc:2931 | max tag index exceeded |
| 1512 | Search.cc:3621 | unexpected filter path |
| 1513 | Search.cc:3813 | tns incr existing vertex |
| 1525 | SpefParse.yy:806 | {} is not positive. |
| 1526 | SpefParse.yy:815 | {:.4f} is not positive. |
| 1527 | SpefParse.yy:821 | {:.4f} is not positive. |
| 1550 | Sta.cc:2171 | '{}' is not a valid start point. |
| 1551 | Sta.cc:2230 | '{}' is not a valid endpoint. |
| 1552 | Sta.cc:2233 | '{}' is not a valid endpoint. |
| 1553 | Sta.cc:2591 | maximum scene count exceeded |
| 1554 | Sta.cc:2168 | '{}' is not a valid start point. |
| 1555 | Sta.cc:2739 | liberty name/filename {} not found. |
| 1556 | Sta.cc:576 | multiple scenes reference mode {} |
| 1557 | Sta.cc:4470 | net {} already exists. |
| 1558 | Sta.cc:2624 | Spef file {} not found. |
| 1559 | Sta.cc:2626 | Spef file {} not found. |
| 1560 | Sta.cc:4264 | spef {} not found. |
| 1561 | Sta.cc:2254 | mode {} not found. |
| 1563 | Sta.cc:4599 | corresponding timing arc set not found in equiv cells |
| 1570 | Sta.cc:3754 | No network has been linked. |
| 1571 | Sta.cc:3763 | No network has been linked. |
| 1572 | Sta.cc:2638 | mode {} not found. |
| 1578 | Sta.cc:2388 | No liberty POCV/LVF models found. |
| 1590 | Search.i:255 | {} is not a known path group name. |
| 1591 | Search.i:472 | unknown report path field {} |
| 1592 | Search.i:1009 | unknown common clk pessimism mode. |
| 1601 | WriteSpice.cc:420 | pg_pin {}/{} voltage {} not found, |
| 1602 | WriteSpice.cc:426 | Liberty pg_port {}/{} missing voltage_name attribute, |
| 1603 | WriteSpice.cc:400 | {} pg_port {} not found, |
| 1604 | WriteSpice.cc:863 | no register/latch found for path from {} to {}, |
| 1605 | WriteSpice.cc:213 | The subkct file {} is missing definitions for {} |
| 1606 | WritePathSpice.cc:236 | No instance with Liberty cell found in path. |
| 1620 | WriteSdc.cc:1245 | unknown exception type |
| 1621 | WriteSdc.cc:1784 | illegal set_logic value |
| 1622 | WriteSdc.cc:1825 | invalid set_case_analysis value |
| 1640 | SpefReader.cc:131 | illegal bus delimiters. |
| 1641 | SpefReader.cc:188 | unknown units {}. |
| 1642 | SpefReader.cc:200 | unknown units {}. |
| 1643 | SpefReader.cc:212 | unknown units {}. |
| 1644 | SpefReader.cc:226 | unknown units {}. |
| 1645 | SpefReader.cc:247 | no name map entry for {}. |
| 1646 | SpefReader.cc:266 | unknown port direction {}. |
| 1647 | SpefReader.cc:292 | pin {}{}{} not found. |
| 1648 | SpefReader.cc:296 | instance {}{}{} not found. |
| 1649 | SpefReader.cc:303 | pin {} not found. |
| 1650 | SpefReader.cc:317 | net {} not found. |
| 1651 | SpefReader.cc:430 | {} not connected to net {}. |
| 1652 | SpefReader.cc:435 | pin {}{}{} not found. |
| 1653 | SpefReader.cc:445 | {}{}{} not connected to net {}. |
| 1654 | SpefReader.cc:450 | node {}{}{} not a pin or net:number |
| 1655 | SpefReader.cc:463 | {} not connected to net {}. |
| 1656 | SpefReader.cc:468 | pin {} not found. |
| 1657 | SpefReader.cc:471 | pin {} not found. |
| 1658 | SpefReader.cc:589 | {} |
| 1670 | SpefParse.yy:44 | {} |
| 1700 | CcsCeffDelayCalc.cc:115 | VDD not defined in library {} |
| 1701 | CcsCeffDelayCalc.cc:305 | unsupported ccs region count. |
| 1751 | ArcDcalcWaveforms.cc:64 | VDD not defined in library {} |
| 1752 | PrimaDelayCalc.cc:970 | G matrix is singular. |
| 1754 | PrimaDelayCalc.cc:450 | Port {}/{}/{} has no equivalent in scene {}. |
| 1800 | Sdc.tcl:2984 | missing margin argument. |
| 1801 | Sdc.tcl:2986 | '$args' ignored. |
| 1802 | Sdc.tcl:2990 | -from, -through or -to required. |
| 1860 | SaifReader.cc:210 | {} |
| 1861 | SaifReader.cc:104 | SAIF TIMESCALE units not us, ns, or ps. |
| 1862 | SaifReader.cc:107 | SAIF TIMESCALE multiplier not 1, 10, or 100. |
| 1866 | LibertyParser.cc:295 | {} |
| 1870 | VerilogReader.cc:1963 | {} |
| 1903 | WriteSpice.tcl:180 | Cannot write $spice_dir. |
| 1904 | WriteSpice.tcl:183 | No -spice_filename specified. |
| 1905 | WriteSpice.tcl:189 | -lib_subckt_file $lib_subckt_file is not readable. |
| 1906 | WriteSpice.tcl:192 | No -lib_subckt_file specified. |
| 1907 | WriteSpice.tcl:198 | -model_file $model_file is not readable. |
| 1908 | WriteSpice.tcl:201 | No -model_file specified. |
| 1909 | WriteSpice.tcl:207 | No -power specified. |
| 1910 | WriteSpice.tcl:146 | Unknown circuit simulator |
| 1913 | WriteSpice.tcl:279 | Cannot write $plot_dir. |
| 1914 | WriteSpice.tcl:282 | No -plot_basename specified. |
| 1915 | WriteSpice.tcl:213 | No -ground specified. |
| 1920 | WriteSpice.tcl:71 | Directory $spice_dir not found. |
| 1921 | WriteSpice.tcl:74 | $spice_dir is not a directory. |
| 1922 | WriteSpice.tcl:77 | Cannot write in $spice_dir. |
| 1923 | WriteSpice.tcl:80 | No -spice_file specified. |
| 1924 | WriteSpice.tcl:86 | -lib_subckt_file $lib_subckt_file is not readable. |
| 1925 | WriteSpice.tcl:89 | No -lib_subckt_file specified. |
| 1926 | WriteSpice.tcl:95 | -model_file $model_file is not readable. |
| 1927 | WriteSpice.tcl:98 | No -model_file specified. |
| 1928 | WriteSpice.tcl:104 | No -power specified. |
| 1929 | WriteSpice.tcl:110 | No -ground specified. |
| 1930 | WriteSpice.tcl:116 | No -path_args specified. |
| 1931 | WriteSpice.tcl:121 | No paths found for -path_args $path_args. |
| 1932 | WriteSpice.tcl:174 | Missing -gates argument. |
| 1933 | WriteSpice.tcl:247 | Missing -gates argument. |
| 2100 | ArcDelayCalc.cc:101 | no timing arc for {} input/driver pins. |
| 2101 | ArcDelayCalc.cc:106 | {} not a valid rise/fall. |
| 2102 | ArcDelayCalc.cc:109 | Pin {}/{} not found. |
| 2103 | ArcDelayCalc.cc:112 | {} not a valid rise/fall. |
| 2104 | ArcDelayCalc.cc:115 | Pin {}/{} not found. |
| 2105 | ArcDelayCalc.cc:118 | Instance {} not found. |
| 2120 | Network.i:267 | unknown namespace |
| 2121 | Sdc.i:121 | unknown analysis type |
| 2122 | Sdc.i:260 | unknown wire load mode |
| 2123 | Sdc.i:1065 | unknown clock sense |
| 2140 | TclTypeHelpers.cc:166 | Delay calc arg requires 5 or 6 args. |
| 2141 | Sta.cc:3767 | No liberty libraries found. |
| 2150 | StaTclTypes.i:423 | Unknown transition '{}'. |
| 2151 | StaTclTypes.i:441 | Unknown rise/fall edge '{}'. |
| 2152 | StaTclTypes.i:459 | Unknown transition name '{}'. |
| 2153 | StaTclTypes.i:477 | Unknown port direction '{}'. |
| 2154 | StaTclTypes.i:492 | Unknown timing role '{}'. |
| 2155 | StaTclTypes.i:515 | Unknown logic value '{}'. |
| 2156 | StaTclTypes.i:530 | Unknown analysis type '{}'. |
| 2157 | StaTclTypes.i:735 | {} is not a floating point number. |
| 2158 | StaTclTypes.i:797 | {} is not an integer. |
| 2159 | StaTclTypes.i:859 | {} not min or max. |
| 2160 | StaTclTypes.i:880 | {} not min, max or min_max. |
| 2161 | StaTclTypes.i:896 | {} not min, max or min_max. |
| 2162 | StaTclTypes.i:918 | {} not setup, hold, min or max. |
| 2163 | StaTclTypes.i:938 | {} not setup, hold, setup_hold, min, max or min_max. |
| 2164 | StaTclTypes.i:953 | {} not early/min, late/max or early_late/min_max. |
| 2165 | StaTclTypes.i:967 | {} not early/min, late/max or early_late/min_max. |
| 2166 | StaTclTypes.i:982 | {} not net_delay, cell_delay or cell_check. |
| 2167 | StaTclTypes.i:995 | {} not cell_delay or cell_check. |
| 2168 | StaTclTypes.i:1008 | {} not clk or data. |
| 2169 | StaTclTypes.i:1021 | {} not group or slack. |
| 2170 | StaTclTypes.i:1046 | unknown path type {}. |
| 2171 | StaTclTypes.i:1413 | unknown circuit simulator {}. |
| 2173 | StaTclTypes.i:1237 | {} is not a scene object. |
| 2174 | StaTclTypes.i:1200 | {} is not a mode object. |
| 2175 | StaTclTypes.i:767 | {} is not a floating point number. |
| 2200 | Property.tcl:62 | get_property object is null. |
| 2201 | Property.tcl:67 | get_property -object_type must be specified with object name argument. |
| 2203 | Property.tcl:111 | get_property unsupported object type $object_type. |
| 2204 | Property.tcl:114 | get_property $object is not an object. |
| 2205 | Property.tcl:141 | $object_type not supported. |
| 2206 | Property.tcl:144 | $object_type '$object_name' not found. |
| 2207 | Property.tcl:162 | define_property -object_type must be specified. |
| 2208 | Property.tcl:165 | define_property -type must be specified. |
| 2209 | Property.i:173 | define_property -object_type {} not supported. |
| 2210 | Property.cc:1415 | unknown property type '{}' (use bool, float or string). |
| 2211 | Property.cc:1532 | {} property '{}' is not defined. |
| 2212 | Property.cc:1430 | '{}' is not a bool property value. |
| 2213 | Property.tcl:184 | set_property $object is not an object. |
| 2214 | Property.i:210 | set_property unsupported object type {}. |
| 2215 | Property.cc:1435 | '{}' is not a float property value. |
| 2300 | Bfs.cc:264 | vertex {} level {} != bfs level {} |
| 2400 | Power.cc:835 | unknown cudd constant |
| 2500 | DelayCalc.tcl:140 | delay calculator $alg not found. |
| 2501 | DelayCalc.tcl:172 | set_assigned_delay missing -from argument. |
| 2502 | DelayCalc.tcl:177 | set_assigned_delay missing -to argument. |
| 2503 | DelayCalc.tcl:182 | set_assigned_delay delay is not a float. |
| 2504 | DelayCalc.tcl:187 | set_annotated_delay -cell and -net options are mutually excluive. |
| 2505 | DelayCalc.tcl:193 | set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst]. |
| 2506 | DelayCalc.tcl:198 | set_assigned_delay pin [get_full_name $pin] is not attached to instance [get_full_name $inst] |
| 2508 | DelayCalc.tcl:203 | set_assigned_delay -cell or -net required. |
| 2509 | DelayCalc.tcl:247 | set_assigned_delay no timing arcs found between from/to pins. |
| 2510 | DelayCalc.tcl:279 | set_assigned_check missing -from argument. |
| 2511 | DelayCalc.tcl:288 | set_assigned_check -clock must be rise or fall. |
| 2512 | DelayCalc.tcl:295 | set_assigned_check missing -to argument. |
| 2513 | DelayCalc.tcl:310 | set_assigned_check missing -setup|-hold|-recovery|-removal check type.. |
| 2514 | DelayCalc.tcl:318 | set_assigned_check check_value is not a float. |
| 2516 | DelayCalc.tcl:370 | set_assigned_check no check arcs found between from/to pins. |
| 2518 | DelayCalc.tcl:397 | set_assigned_transition transition is not a float. |
| 2600 | FilterObjects.cc:195 | -filter parsing failed at '{}'. |
| 2601 | FilterObjects.cc:238 | -filter extraneous ). |
| 2602 | FilterObjects.cc:244 | -filter extraneous ). |
| 2603 | FilterObjects.cc:257 | -filter unmatched (. |
| 2604 | FilterObjects.cc:323 | -filter logical OR requires at least two operands. |
| 2605 | FilterObjects.cc:335 | -filter logical AND requires two operands. |
| 2606 | FilterObjects.cc:350 | -filter NOT missing operand. |
| 2607 | FilterObjects.cc:423 | -filter expression is empty. |
| 2608 | FilterObjects.cc:426 | -filter expression evaluated to multiple sets. |
| 2700 | ConcreteParasitics.cc:981 | piModel called on non-PiElmore parasitic. |
| 2701 | ConcreteParasitics.cc:994 | setPiModel called on non-PiElmore parasitic. |
| 2720 | ReportPath.cc:257 | unknown path reporting field {}. |